 |
 |
 |
 |
BitPost ™ is an alternative product for Creosote or Carbolineum. It is a New Zealand manufactured bituminous emulsion / polymer product.
Because of its rot-resisting and disinfecting effect, BitPost ™ is ideally suited for the preservation and staining of wooden structures such as Post and Rail fences, Retaining walls and Construction timber framing etc. It is also suitable to preserve in-ground planted posts.
Timber typically requires one coat only although when spraying it might require two coats to ensure an even black end result. One (1) Litre will cover approximately 2 to 3 Square Meters thus 8 Litre will cover 16 to 24 Square Meters. On Post and (3 rails) fence 8 Litres will spray approximately 20 linear meters, stained on both sides.
BitPost ™ - Spray Grade is intended primarily for surface application by spraying with our selected knapsack garden sprayer or by other spray equipment. BitPost ™ - Spray Grade Gives an economical yet high quality finish which is ideal for larger projects.
A re-coat will be required after 3 to 5 years, where after it will last another 8 to 10 years before coating again.
The colour is black to very dark brown.
Our Spray kit contains:
- 5 Litre sprayer with 8 litre Bitpost™ Spray Grade which is specifically formulated for application by knapsack spraying. - 1 x pair safety glasses - 1 x nose / mouth mask - 1 x pair latex gloves
- For more detailed information please see our documents in the "Extended Information" tab
BitPost ™ is an oily water emulsion, water-soluble, non-flammable, black to very brown mixture from bitumen, water and petroleum components, smelling of tar. BitPost ™ is a New Zealand manufactured, creosote alternative, bituminous emulsion / polymer product which will penetrate the timber rapidly due to its viscosity. BitPost ™ gives a high degree of water repellence and will retard distortion, movement and splitting of timber, due to weather exposure. BitPost ™ preserver is non-flammable and the treated wood, after drying, presents no greater fire hazard than ordinary timber. BitPost ™ is non-corrosive to metals and can have a protective action on iron and steel. BitPost ™ is non toxic and is safe around your animals.
Please see the following documents
These documents contain important information about:
- Material Safety Data
- General Information
- Application
- Storage
- Safe use
- First Aid
- Clean Up
- Warranty
- Available Packing Sizes
- and more information
Note: To view the following PDF documents, you will require some type of PDF-reader plugin on your system. If you need an up-to-date plugin you can install Adobe's free PDF reader from here.
Documents:
Material Safety Data Sheet (MSDS)
Product Data Sheet (PDS)
General Information Summary
Information Brochure
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- BitPost ™ is an alternative product for the use of Creosote or Carbolimium which has been limited and/or forbidden by some countries due to the introduction of stricter environmental regulations.
- BitPost ™ will retard distortion, movement and splitting of timber, due to weather exposure
- BitPost ™ is non-corrosive to metals
- Can be used on other wood structures
- Suitable on in-ground Posts
- Will penetrate the timber rapidly
- For best results apply to dry timber
- BitPost ™ is idealy suited for:
- - Horse Fencing : Horses will not nibble on coated fence.
- - Chicken Coops : BitPost will reduce the risk of RED MITE infestation.
- - Vegetable Gardens : BitPost can be used on boxes and stakes.
|
|
 |
 |
 |
 |

|