FlexsoTar ™ is a high build dense black epoxy/bitumen co-polymer based two pack product. The product sets to render a tough, durable and UV stable gloss black, flexible rubbery finish. This product is non-toxic and can safely be used in applications where it comes into contact with drinkable water.

FlexsoTar ™ is a versatile sealer that can be used in a wide range of applications. Such as:

• Concrete tile and metal roof repairs: - FlexsoTar™ can be used in conjunction with fibreglass membrane or hemp cloth to form a laminate or on its own for long lasting repairs of leaks, etc.
• Animal drinking troughs: - FlexsoTar™ can be used on concrete drinking troughs to render a high quality water proof liner. The liner will also protect against moss and will make cleaning effortless.
• Vehicle undercarriage protection: - FlexsoTar™ will give a long lasting, durable coating on vehicle undercarriages and will prevent rusting.
• Trailer bins and frames: - renew your trailer with a tough and hard wearing bin coating by applying FlexsoTar™.
• Steel and metal structures
• Seal and water proof timber and plywood structures
• Water proof brick and block work
• Water proof concrete floors: - FlexsoTar™ can be used under carpets.

• For more detailed information please see our documents in the "Extended Information" tab
  
  Application Instructions:
  
  Surface preparation:
  Ensure the surface to be coated/sealed is dry and clean; remove any old, loose or flaked paint or rust, moss, lichen, old silicone sealer, etc. before application. Rust does not need to be pre-treated and FlexsoTar™ can be applied directly onto rusty surfaces although for best results it is recommended to use our, RUST TREATMENT™, rust converter before application of FlexsoTar™.
  
  Mixing Instructions:
  FlexsoTar™ is available in either one (1) litre or two (2) litre quantities. The product is supplied as a two pack system consisting of PART A (Epoxy/Bitumen co-polymer) and PART B (Hardener). Add PART B (entire content) to the can containing PART A (This can is big enough to hold the entire content of PART A and PART B).
  
  Final Finish:
  FlexsoTar™ can be left as the final finish and does not require further painting. If it is used to repair leaky roofs we recommend a top coat with GilsoFlex™ Roof sealer and paint.
  
  Clean up:
  Clean hands with plenty of soap and water to remove any FlexsoTar™ before gelling occurs. It is recommended to use disposable gloves during application.

Please see the following documents

These documents contain important information about:

• Material Safety Data
• General Information
• Application
• Storage
• Safe use
• First Aid
• Clean Up
• Warranty
• Available Packing Sizes
• and more information

Note: To view the following PDF documents, you will require some type of PDF-reader plugin on your system.
If you need an up-to-date plugin you can install Adobe's free PDF reader from here.




Documents:

Product Data Sheet
Material Safety Data Sheet (MSDS)