 |
GilsoFlex ™ is a New Zealand manufactured dense black Bituminous/Gilsonite co-polymer, solvent / water emulsion based sealer and paint ideally suited for sealing and painting of exposed roofs and steel structures, developed primarily for New Zealand outdoor conditions.
GilsoFlex ™ Spraying Thinner is intended primarily for thinning GilsoFlex ™ roof paint to a suitable spraying viscosity. The thinner is a blend of Xylene, Kerosene and other hydrocarbon solvents. For best results use to a maximum of 10%.
The thinner can also be used for clean-up of spraying equipment etc.
- Packaging: Available in 4 Litre, 1 Litre and 0.5 Liter cans
Use: Suitable for use as a thinner for GilsoFlex ™ Roof Paint only. It is not compatible with other paint systems
Thinning Ratio: Maximum 10% (Typically 5% should be adequate)
Other:
– Contains volatile solvent, keep away from heat and open flame.
– Keep out of reach of children.
– Keep closed when not in use, avoid breathing vapour - ensure good air flow when mixing.
Storage, Handling Safety: Refer to Material Safety Data Sheet (MSDS GilsoFlex™ Thinner) also refer to “Health and Safety in the Surface Coating Industry” Brief 3, October 2007 as published by the Department of Labour.
|
|
|
