HT-Paint is a fast drying, heat resistant, decorative coating for use on any clean steel surfaces with in-service temperatures up to 650°C.

HT-Paint is a high temperature paint designed to meet the needs of the future. This state of the art high temperature finish is performance oriented and environmentally compliant.

HT-Paint is a high temperature resistant (650°C) high solids coating. The chemistry used in this coating maximizes performance with reduced VOC content. For effective cross-linking of the paint to a metal surface a bake cycle is recommended but not essential.

HT-Paint has a special solvent package that aids application, but has lower VOC than other standard high temperature coatings. Constant agitation during application is recommended for all high temperature coatings to ensure the best finish.

HT-Paint is specially formulated to be used on heating appliances, wood or coal burning stoves, barbecues, engine manifolds, mufflers, exhaust systems, smoke stacks, boilers, industrial furnaces, aerospace, brakes, engines and engine components and other applications that require high temperature stability.

Paint should be thoroughly mixed before application. Constant agitation during use is required with all high temperature coatings.

It is not recommended that any solvents or additives be added to this product. It can however be thinned with 2-Butoxyethanol thinner if required.

One litre will typically cover approximately 7 square meters dependent upon surface and application method

HT-Paint is intended primarily for surface application by airless or conventional spray, brush or velvet roller.

This product is available in five colors.

• Black
• Metallic Gray-silver
• Metallic Copper-brown
• Metallic Gun-blue
• Metallic Moss-green

PLEASE SPECIFY REQUIRED COLOUR WHEN PURCHASE.

• For more detailed information please see our documents in the "Extended Information" tab
  
  Physical Properties:
  Viscosity ASTM D 1200 18-22 sec #3 Zahn Cup
  Gloss ASTM D 523 12-15 @ 60 degrees
  Cure Schedule 220 °C /10 minutes
  Volume Solids 40-42%
  Solvent Resistance 50 MEK D-Rubs
  Material VOC ASTM D-3960 504 g/l
  Pencil Hardness ASTM D3363 3H+
  1/8 Mandrel ASTM D 522 Pass
  Salt Fog ASTM B117 50 Hrs. +
  Adhesion ASTM D 3357 Pass 5B
  QUV No gloss loss @ 300 hrs.
  Rec. DFT (Aluminized) 12 -40 microns
  Rec. DFT (Mild Steel) 20-50 microns
  Clean-up Xylene

Please see the following documents

These documents contain important information about:

• Material Safety Data
• General Information
• Application
• Storage
• Safe use
• First Aid
• Clean Up
• Warranty
• Available Packing Sizes
• and more information

Note: To view the following PDF documents, you will require some type of PDF-reader plugin on your system.
If you need an up-to-date plugin you can install Adobe's free PDF reader from here.




Documents:

2-BUTOXYETHANOL Material Safety Data Sheet (MSDS)

HT-Paint Product Data Sheet