 |
 |
 |
|
StainDex™ is a New Zealand manufactured co-polymer timber stain and preserver product.
Because of its rot-resisting and disinfecting effect, StainDex™ is ideally suited for the preservation and staining of wooden structures such as Decks, Outdoor Furniture and Post and Rail fences etc.
Timber requires one coat only and 20 Litres will cover approximately 60 to 100 Square Meters. One (1) Litre will cover approximately 3 to 5 Square Meters depending on substrate.
StainDex™ is intended primarily for surface application by brush,roller, paint pad (sheepskin sock) or airless spraying.
A re-coat will be required after 5 to 8 years.
Please see the Colour Chart image above for the colours in our range. We are in the process of adding more colours to our range. (Please ask via "eMail" if you would like us to match a specific colour for you, and we will advise)
Featured StainDex Project
- For more detailed information please see our documents in the "Extended Information" tab
StainDex™ is an oily water emulsion, water-soluble, non-flammable, pigmented mixture from bitumen, polymers, water and petroleum components.
StainDex™ is a New Zealand manufactured, bituminous emulsion / polymer product which will penetrate the timber rapidly due to its viscosity.
StainDex™ gives a high degree of water repellence and will retard distortion, movement and splitting of timber, due to weather exposure.
StainDex™ preserver is non-flammable and the treated wood, after drying, presents no greater fire hazard than ordinary timber.
StainDex™ is non-corrosive to metals and can have a protective action on iron and steel.
Please see the following documents
These documents contain important information about:
- Material Safety Data
- General Information
- Application
- Storage
- Safe use
- First Aid
- Clean Up
- Warranty
- Available Packing Sizes
- and more information
Note: To view the following PDF documents, you will require some type of PDF-reader plugin on your system. If you need an up-to-date plugin you can install Adobe's free PDF reader from here.
Documents:
Material Safety Data Sheet (MSDS)
StainDex™ Product Data Sheet
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- StainDex™ will retard distortion, movement and splitting of timber, due to weather exposure
- StainDex™ is non-corrosive to metals
- Can be used on other wood structures
- Will penetrate the timber rapidly
- For best results apply to dry timber
StainDex™ is idealy suited for:
- Decks and hand rails
- Outdoor Furniture: As it will not rub - off on clothing.
- Fences and retaining walls
|
|
|
|
|
|
|
Slate black wood stain 
